Repetidor WiFi inalámbrico de 1200Mbps amplificador de señal Wifi extensor de doble banda 2,4G 5G 4 antena enrutador amplificado

Repeater mode:

Sometimes a device may be in the living room, but due to poor signal, the signal in the bedroom may only be one grid, which requires further expansion of the wireless network. At this point, it is possible to consider using a relay to expand the network through relay mode. The name of the "amplified" wireless signal defaults to the same name as the original wireless router signal, and you can also change the settings according to your own habits. When setting the repeater, it is necessary to connect to the higher-level router signal and keep the connection signal in good condition, which is conducive to expanding the stability of the network signal.

Feature: By transitioning from wireless to wireless, 1:1 replication of a wireless network and signal amplification are performed to expand coverage.

Applicable scenario: Expanding the network to achieve signal "coverage" within a certain range

AP mode:

The AP mode is quite unique, usually only AP hotspot devices have this function, and AP devices do not have bridging or routing modes, but they support relay functions. The difference between relay and AP hotspot is also very simple. The relay mode is actually a 1:1 replication of a wireless network, and does not require cable connections. Moreover, both routers and AP devices support this mode; The AP mode uses network cables to expand WiFi signals, but it is not responsible for managing the network itself. It is equivalent to a switch with wireless functions, converting wired signals into wireless. Other functions need to be implemented by routers (such as assigning IP, managing the network, etc.).

Feature: Converted into a wireless network through network cables, without management or routing functions.

Applicable scenario: Covering signal dead corners, similar in function to relay, but AP devices do not need to be configured, plug and play.

The heat dissipation design on the bottom surface ensures that the extender cools quickly while working, and improves the service life and WiFi stability

RJ45 network port supports wired access; WPS one-key encryption button

The product has four external antennas, the relay signal is more stable

300Mbps:

Wireless frequency: support 2.4GHz up to 300Mbps transmission rate

Wireless standard: IEEE802.11B/G/N

Hardware specifications:

Interface: WLAN port (10/100Mbps), LAN port (10/100Mbps)

Input power: AC 100-240V, 50 / 60Hz

Signal rate: 2.4GHz: up to 300Mbps (dynamic)

Covering area: 100m

Wireless security: support 64/128 bit WEP, WPA-PSK / WPA2-PSK, 802.1X

Standards and protocols: Wi-Fi 802.11b/g/n

Wi-Fi support frequency: 2.4GHz

Wired transmission rate: 10/100Mbps

Colour: Black / White

Material: ABS

Size: 17.2 x 9 x 7cm

1200Mbps Hardware Specifications:

Chip: MTK7628+7613

Interface: LAN port 1, LAN port 2 (2x 10/100Mbps)

Input power: AC100-240V, 50/60Hz

Cable standard: IEEE802.11AC, with down compatibility with IEEE802.11B/G/N

Frequency, which supports both 2.4 GHz and 5.0 GHz

Transmission speed up to 1200Mbps

Four external antennas for more stable relay signals

RJ45 network port supports wired access

3-sided heat dissipation design ensures quick cooling of the extender during operation, improving durability and stability WiF

Small size and wall design make it easy to implement and flexible to move, without taking up more space for you

Simple and user-friendly operating interface, eliminating cumbersome configuration

Repeater /AP two modes of operation